Cold Foam SF is a fine-pore polyurethane foam consisting of 2 components, with good skin structure for facial and body appliances, for 3-dimensional mask effects. Cold Foam is a reaction foam that reaches a volume 5 to 6 times its original size. The set consists of the 2 components and a release agent. Separately weigh out the correct amounts of the base component and the reaction component. Then, use a disposable cup to manually mix these two components quickly and thoroughly. Next, immediately pour the finished mixture into a mold onto which a separator agent has been carefully applied. The mold must then be immediately closed and fastened shut with a screw clamp or with fastening straps. After 45 to 60 minutes, the mold can be opened and the foam appliances can be removed from the mold after thorough powdering. Cold Foam SF appliances are bonded in place with Spirit Gum or Pros-Aide.

Precautionary statements: P102 Keep out of reach of children. P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Additional information: EUH210 Safety data sheet available on request.

Danger

Hazard-determining components of labelling: 4,4'-methylenediphenyl diisocyanate

Hazard statements: H302+H332 Harmful if swallowed or if inhaled. H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H351 Suspected of causing cancer (state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard).

Precautionary statements: P102 Keep out of reach of children. P280 Wear protective gloves/protective clothing/eye protection/face protection. P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308+P313 IF exposed or concerned: Get medical advice/ attention. P312 Call a POISON CENTRE/doctor if you feel unwell. P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Additional information: EUH204 Contains isocyanates. May produce an allergic reaction.

Danger

Hazard-determining components of labelling: White mineral oil, petroleum, Dibutylbis(myristoxy)stannan, dibutyltin dilaurate, Naphtha (petroleum), hydrotreated heavy, Hydrocarbons, C9-C10, n-Alkane, Cycloalkane, <2% Arom

Hazard statements: H304 May be fatal if swallowed and enters airways. H336 May cause drowsiness or dizziness. H412 Harmful to aquatic life with long lasting effects. H360FD May damage fertility. May damage the unborn child.

Precautionary statements: P102 Keep out of reach of children. P301+P310 IF SWALLOWED: Immediately call a POISON CENTER/doctor. P370+P378 In case of fire: Use sand to extinguish. P370+P378 In case of fire: Use fire-extinguishing powder to extinguish.

Additional information: EUH208 Contains . May produce an allergic reaction.

Danger